Jiangsu LeBron Machinery Technology Co., Ltd.

products

Factory address : No. 551, the Zhenze West Road, Huazhuang Street, Binhu Distrct, Wuxi City, Jiangsu, China

Contacts : Mr. Wang

Email : sales@lebron-machinery.com

Company Address : 1604#, Yangming Sicence & Technology Industry Center, No.855 Nanhu Avenue,Wuxi city, Jiangsu, China

Tel : +86-510-8388 8805

Fax : +86-510-8262 0085

Contacts : Mr. Alfred Van

E-mail : alfred@lebron-machinery.com

Metal Downspout Roll Forming Machine

0-0

        A downspout roll forming machine, known as rainwater downpipe roll forming machine as well, has been designed for making square or round (circle or rectangular) rainwater pipes. And the downspout has many different names as, waterspout, downpipe, drain spout, and roof drain pipe etc.

        According to wiki, the downspouts are applied mainly as below: Downspouts are usually vertical and usually extend down to ground level. The water is directed away from the building’s foundation, to protect the foundations from water damage. The water is usually piped to a sewer, or let into the ground.

        In the market there are two types of downspouts: square or rectangular downspouts and circle or round downspouts. The round or circle downspouts are straight from the roof top to the ground, and the square or rectangular waterspout usually have a curved pipe or an elbow downpipe as a turn at the down end of the straight pipe.

Machine Specifications
Weight	About 6000kgs
Size	About 10m x 1.3m x 1m (L x W x H)
Color	Main color: blue
Color	Warning color: yellow
Suitable Raw Material
Material	Galvanized Steel Coils
Thickness	0.4-0.6mm
Coil width	325mm
Yield Strength	235Mpa
Main Technical Parameters
Quantity of forming rollers stations	22 stations for square pipe and 26 stations for round pipes20-22
Diameter of forming rollers shafts	70mm
Roll Forming Speed	0-12m/min. (not including cutting)
Forming rollers material	No.45 steel, coated with chromed treatment
Cutter material	CR12 mould steel, with quenched treatment
Controlling system	PLC and Converter
Electric Power requirement	Motor of roll forming machine: 7.5kw
	Motor of sawing cutter: 3kw
	Hydraulic Power: 4.0kw
Electric voltage	According to customer’s requirement